Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: TO REDUCE RISK OF PERSONAL INJURY
-
UNPLUG CLEANER BEFORE SERVICING
Problem
Cleaner won't run
Cleaner won't pick-up
or low suction
Dust escaping from cleaner
Cleaner tools won't pick up
Headlight not working
Cleaner is difficult to push
Brushroll not rotating
Belt burns or breaks
Possible Reasons
1.
Power cord not firmly plugged into outlet.
2. Blown fuse or tripped breaker.
3.
Needs service.
1. Paper bag full.
2.
Paper bag not installed correctly.
3.
Broken or worn belt.
4. Carpet height setting is incorrect.
5. Unit misassembled resulting in air flow leakage.
6.
Dirty HEPA filter.
7.
Brushroll worn.
8.
Dirty bag chamber filter.
1 . Paper bag full.
2.
Paper bag not installed correctly.
3.
Puncturelhole in paper bag.
4. No bag in cleaner.
5. Dirty bag chamber filter.
1. Hose clogged.
2.
Bag inlet clogged.
3.
Paper bag full.
4. No bag in cleaner, filter clogged.
1.
Bulb burnt out.
2.
Loose electrical wires.
1.
Carpet height setting is incorrect.
1. Broken belt.
2.
Brushroll jammed with an obstruction.
1.
Brush may be jammed with debris.
2.
Brush end caps are clooged with debris.
3.
Capet height setting is incorrect.
Possible Solutions
1. Plug cord in firmly.
2.
Check fuse or breaker in home. Replace
fuseheset breaker.
3.
Take to service center or call
l-8OO-32l-ll34.
1.
Replace paper bag
-
Pg. 6.
2. Insert finger into hole and push paper away from
opening OR review paper bag removal and
replacement
-
Pg.
6.
3.
Review belt removal and replacement
-
Pg.
8.
4.
Set carpet height adjustment to appropriate
setting for carpet being cleaned
-
Pg. 5.
5. Reassemble unit 1 review assembly
-
Pg.
4.
6.
Replace HEPA filter
-
Pg. 7.
7.
Review brushroll removal and replacement
-
Pg. 8.
8.
Review general maintenance
-
Pg. 9.
1.
Replace paper bag
-
Pg.
6.
2.
Review paper bag installation
-
Pg.
6.
3. Replace paper bag-Pg.
6.
Cleanlreplace filters
-
Pg.
7
4.
Install bag & clean filter
-
Pg.
7.
5. Review general maintenance
-
Pg. 9.
1.
Remove hose and tools; remove obstruction
-
Pg.
3.
2.
Remove hose (Pg.
3)
and paper bag (Pg.
6).
3.
Replace paper bag
-
Pg.
6.
4.
Install paper bag (Pg.
6)
and clean filter (Pg.
7).
1.
Replace bulb
-
Pg.
8.
2.
Call
l-8OO-32l-ll34
for nearest authorized
Royal" Dealer.
1.
Set carpet height adjustment to appropriate
setting for carpet being cleaned
-
Pg.
4.
1.
Review belt removal and replacement
-
Pg. 8.
2. Turn the brushroll onloff switch to the "off posi-
tion. Turn the unit off and unplug. Remove the
obstruction. Plug unit back into outlet and turn the
power and brushroll switches to the "on" position.
1.
Remove brushroll
-
Pg.
8.
Clean brush of debris.
2.
Remove brushroll
-
Pg.
8.
Determine if end caps
rotate freely. If not, replace brushroll
-
Pg. 8.
3.
Set capet height adjustment to appropriate setting
for carpet being cleaned
-
Pg. 4.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE
(1 -800-321 -1 134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal@ Dealer. Costs of any transportation to
and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available
from an authorized Royal" Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when
requesting information or ordering replacement parts. (The model number appears on the back of the cleaner.)
Publicidad
