Perel Tools EAVM360 Manual Del Usuario página 5

8. Specifications
a. DC Voltage
Ranges: 0.1 - 0.5 - 2.5 - 10 - 50 - 250 - 1000 V
Accuracy at FSD: 3
Sensitivity: 20 kΩ / V
Extension: 25 kV (with HV probe extra)
b. AC Voltage
Ranges: 10 - 50 - 250 - 1000 V
Accuracy at FSD: 4
Sensitivity: 9 kΩ / V
Decibelmeter: -10 to +22 dB
0 dB = 1mW / 600 Ω
c. DC Current
Ranges: 50 µ A (at 0.1 VDC position) - 2.5 mA - 25 mA - 0.25 A
Accuracy at FSD: 3
Volt Drop: 250 mV
d. Resistance
Ranges:
x 1 - 0.2 Ω up to 2 kΩ, midscale, at 20 Ω
x 10 - 2 Ω up to 20 kΩ, midscale, at 200 Ω
x 100 - 20 Ω up to 200 kΩ, midscale, at 2 kΩ
x 1k - 200 Ω up to 2 MΩ, midscale, at 20 kΩ
x 10k - 2 kΩ up to 20 MΩ, midscale, at 200 kΩ
Accuracy at FSD: 3
e. General
Iceo 150 µ A - 1.5 mA - 15 mA - 150 mA
hFE 0 -1000 (with extra connector)
Size: 148 x 100 x 35 mm
Weight: approx. 280g
9. Accessories
Test leads
Battery (9V)
Operating manual
10. Battery and Fuse Replacement
Remove screw on the back cover and open the case. Replace the exhausted battery with a new one.
Fuse rarely needs replacement and blows usually as a result of the operator's error. Open the case as mentioned
above and replace the blown fuse with ratings specified: F 1.5A / 250V
Remark: Before attempting to open the case, be sure that the test leads have been disconnected from measurement
circuit to avoid electric shock.
The information in this manual is subject to change without prior notice.
EAVM360 5 PEREL