GIA OEM3 Manual De Usuario E Instalacion página 61

• Drainage
⚫ No need drainage treatment
In regions where become cold in the winter, don't install the drain elbow joint to prevent drain water from freezing and
causing the fan to be damaged. This drainage treatment is not necessary for cooling-only type air conditioner.
When need drainage treatment
⚫
Please use drain elbow joint (in accessory bag). Outdoor unit should be placed on blocks.
• Installation for the cover of valve
For the whole unit that individual cover of valve is available (refer to packing list), the installing method is as
⚫
follow:
After connecting the connection pipes between indoor and outdoor units followed by the installing method
⚫
mentioned above, take out the cover of valve from the accessory bag, and fix it on the side of outdoor unit with three
corresponding screws.( inside the accessory bag ).
INSTALLATION MANUAL
Elbow joint
Fig 16
Fig 17
27
Chassis(outdoor)
Drain pipe(buy it by user)
Cover of valve
Screw