Place the cover back into position.
•
USING THE APPLIANCE
Note: Touch-sensitive controls – press gently.
1.
To switch on the scale, place it on an even surface and press on the On/Off/Tare
Control. As soon as the weight on the display reads zero, the scale is ready for use.
2.
Place the item to be weighed carefully onto scale.
3.
Press the Unit Control to select the units required.
4.
To turn off the scale, press and hold the On/Off/Tare Control.
Warning:
•
Overload Indication: The scale can measure accurately up to 5kg. When the weight
exceeds 5kg the LCD Display will show "O_LD" (see Figure 1)
Low Battery Indication: When the batteries are low, the LCD Display will show "L0"
•
(see Figure 2)
USING THE TARE FUNCTION
1.
Place your empty container onto the scale. The LCD Display will show the weight of
the container.
2.
Press the On/Off/Tare Control to clear the weight of the container and place your
ingredients into the container. The LCD Display will now show the weight of the
ingredients only.
3.
When you remove the ingredients or container, the scale will show a negative load
value. Press the On/Off/Tare Control to reset the value to zero.
CLEANING
•
Clean the scale with a damp cloth and dry before storage.
Caution:
•
Do not use solvents, or products with an acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
•
Never submerge the scale in water or any other liquid or place it under running water.
ENVIRONMENT FRIENDLY DISPOSAL
Please remove the battery before disposing of the device/unit. Do not dispose of
old batteries with your household waste, but at a battery collection station at a
recycling site or in a shop. Consult your municipal authority or your dealer for
information about disposal.
Figure 1
Figure 2
4