Descargar Imprimir esta página

Skil PI0300C-00 Manual Del Propietário página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
Service
WARNING
cause a serious hazard .
Factory Service Center or Authorized SKIL Service Station.
General Maintenance
WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Please contact customer service or an authorized service center for
assistance.
Cleaning
WARNING
The product may be cleaned most effectively with compressed dry air.
WARNING
through openings.
WARNING
ammonia and household detergents that contain ammonia.
Storage
Store the power inverter indoors in a place that is inaccessible to children. Keep away from
corrosive agents.
TROUBLESHOOTING
Problem
The power inverter
cannot be turned
on.
Preventive maintenance performed by unauthorized personal may
result in misplacing of internal wires and components which could
We recommend that all product service be performed by a SKIL
When servicing, use only identical replacement parts . Use of any
other parts could create a hazard or cause product damage .
To avoid serious personal injury, always remove the battery packs
from the power inverter when cleaning .
Always wear safety goggles when cleaning products with
compressed air .
Do not attempt to clean by inserting pointed objected
Certain cleaning agents and solvents damage plastic parts .
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
Cause
1. The Battery pack
capacity is depleted.
2. The battery pack is too
hot.
3. Other electronics error.
Remedy
1. Charge the battery pack.
2. Cool the battery pack until its
temperature drops below 152 °F
(67 °C).
3. Contact SKIL customer service
center for repair.
Some of
13

Publicidad

loading