Publicidad
STEP 1
E
H
1. Attach 2 adjustable anchor brackets (H) to shelf (4) by inserting 2 screws (E) through holes
on adjustable anchor brackets (H), then tighten to shelf (4).
2. Insert 6 wood dowels (C) into wood dowel holes on shelf (4).
3. Attach shelf (4) to shelf rail board (3) and shelf rear rail board (5) by inserting wood dowels (C)
into wood dowel holes on shelf rail board (3) and shelf rear rail board (5).
4. Insert 7 screws (K) through holes on shelf (4), then tighten to shelf rail boards (3) and shelf rear
rail board (5).
STEP 2
1. Insert 2 wood dowels (C) into wood dowel holes on front cross bar (8).
2. Attach front cross bar (8) to desktop (6) by inserting wood dowels (C) into wood dowel holes on
desktop (6).
3. Insert 3 screws (L) through holes on front cross bar (8), then tighten to desktop (6).
E
H
4
^^ Do not use the word 'pre-threaded' to describe any
holes. Call them cam bolt holes, wood dowel holes,
holes, etc.
L
K
K
K
C
C
3
L
8
C
6
K
K
4
C
C
5
L
C
K
K
C
C
3
Publicidad
