Publicidad
STEP 3
1. Insert 2 wood dowels (C) into wood dowel holes on rear support board (7).
2. Attach rear support board (7) to desktop (6) by inserting wood dowels (C) into wood dowel holes
on desktop (6).
3. Insert 3 screws (F) through holes on rear support board (7), then tighten to desktop (6).
STEP 4
D
J
D
1. Insert 2 wood dowels (C) into wood dowel holes on left side frame (1).
2. Attach assembled shelf and desktop to left side frame (1) by inserting wood dowels (C) into
wood dowel holes on desktop (6).
3. Insert 3 nuts (B) into nut holes on shelf (4) and front cross bar (8).
4. Insert 3 machine screws (D) through holes on left side frame (1), then tighten to shelf (4) and
front cross bar (8) with allen wrench (J).
F
C
7
F
C
F
3
D
1
6
4
8
B
6
C
B
B
7
C
Publicidad
