LG DL X860 E Serie Manual Del Propietário página 29

en-us_main.book.book Page 29 Thursday, January 4, 2024 1:46 PM
2
Check the type of installation and connect the
hose to the faucet. Connect all water supply
hoses tightly by hand and then tighten
another 2/3 turn with pliers.
• Type 1 : WITHOUT WASHER (The dryer does
not share the faucet with the washing
machine.)
1) Connect the straight end of the long
hose to the cold water faucet.
b
• Type 2 : WITH WASHER (The dryer shares
the faucet with the washing machine.)
1) Shut off the cold water tap and remove
the washer inlet hose.
2) Connect the short hose
connector using one of the rubber
d
seals.
3) Connect the other end of the short hose
to the cold water faucet.
c
4) Connect the long dryer hose
side of the Y-connector
NOTE
• Before connecting the water line to the dryer,
flush several gallons of water into a drain or
bucket. This will help prevent foreign particles
such as sand and scale from clogging the dryer
inlet valve.
3
Connect the long dryer hose
inlet valve tightly by hand and then tighten
another 2/3 turn with pliers.
to the Y-
c
4
Turn on the cold water faucet.
to one
b
. Connect the
d
5
Check all hoses and Y-connectors (if used) for
leaks.
INSTALLATION
washer hose to the washer and the
other side of the Y-connector
to the dryer
b
29
.
d