Avintage AVI97AX3ZI Manual De Utilización página 45

16-32°C (N class marked on the rating plate). If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected and it may not be possible to obtain temperature
between 5-20°C/5-10°C/10-20°C.
How to set temperature
➢
The controls of your wine cooler (the upper zone and middle zone)
•
" " button
To control this unit's power,ON/OFF.
Press and hold this button for approximately 3 seconds.
•
Display
Upper chamber electronic display
•
Display
Middle chamber electronic display
•
Bouton
Upper chamber temperature setting button
•
Bouton
Middle chamber temperature setting button
•
" " indicator light
Compressor in operation display.
•
" " button
To control the inner light turn on/off.
➢
Setting the temperature control
Each cooling compartment of the wine cooler (upper & middle) is independently controlled. To set the
temperature:
•
When pressing
compartment automatically. The LED will flashing and display the setting temperature.
•
Press once the button, the temperature will decrease 1°C. When exceeding the minimum value that
can be established, it will jump to the highest adjustable temperature value automatically. After
stopping pressing the button for 5 seconds, LED figure will stop flash, then exit setting model.
Upper compartment::the temperature setting can be adjusted from 5°C to 20°C.
Middle compartment: the temperature setting can be adjusted from 5°C to 10°C.
•
If you want to know the actual temperature, please press
show actual temperature. After 5 seconds, it will show the setting temperature.
➢
The controls of your wine cooler (the lower zone)
or button, the system will be entering the set up mode in the upper or middle
or for 3 seconds, display panel will
45