Publicidad
Idiomas disponibles
Idiomas disponibles
1600A01UV3.qxp_GKS18-25 4/27/20 8:12 AM Page 10
*
For replacement blades we recommend Bosch Cordless Circular saw blades. Their thin kerf and
tooth design deliver the superior speed, quality of cut, and reduce battery drain. Use of standard
blades will substantially affect the performance and reduce run-time.
Please refer to the operating/safety instructions, included with connectivity module.
may result in personal injury and property
damage.
This product is intended to cut wood and
wood-like products only. Dust build up
around the lower guard and hub from other
materials (plastic, masonry or metal) may
disable the lower guard operation.
Cutting Masonry/Metal
circular saw. The dust from metal or
masonry cutting will cause the lower guard
to become sluggish and may not close fully
and quickly after cutting these materials.
10
ind Quality Products Online at:
Specifications
Model number GKS18V-25GC
Voltage rating 18 V
No load speed n
Blade arbor hole 5/8" (16mm) Round
Blade tooth thickness
Blade body thickness 0.079" (2.0mm) Maximum
Depth of cut at 0° 2-1/2" (63.5mm) Maximum
Depth of cut at 45° 1-13/16" (46mm) Maximum
Depth of cut at 50° 1-5/8" (41.3mm) Maximum
Allowed ambient temperature
– during charging
– during operation and storage
Connectivity Module (sold separately)
Battery Packs/Chargers
Please refer to the battery/charger list, included with your tool.
Intended Use
Use this saw only as
intended. Unintended use
Do not cut metal or
masonry
with
Do not use abrasive
wheels.
This tool is not
GlobalTestSupply
www.
2,500–5,000/min
0
Blade* 7-1/4"
7/64" (2.6mm)*
*minimum 3/64" (1.0 mm)
32...95 °F (0...+35 °C)
–4...122 °F (–20...+50 °C)
intended for usage with metal or masonry
cut-off wheels.
wheel or water feed devices with this
circular saw. Masonry cutting waste will
enter the lower guard system, harden and
cause the guard to become inoperable. Use
of water in masonry cutting applications
with an electric circular saw will cause
electric shock hazards.
This tool is not intended for usage with
metal or masonry cut-off wheels.
this
.com
Do
not
use
Wet
Diamond cutting off
sales@GlobalTestSupply.com
Publicidad
