Epson TM-S1000 Manual Del Usuario página 16

English
Processing Documents
The TM-S1000 is capable of performing the following four actions on a
document in a single pass: scanning the image of both the face and the
back, reading magnetic characters, and franking.
Flow of Single Pass Processing
5
1. Insert a document into the feeder section.
2. The scanner scans the images of the face and back.
3. The scanner reads the magnetic characters on the document.
4. The franking section prints a pattern.
5. The document is fed to the outlet.
Notes on Processing Documents
❏
Do not use documents smaller than 120 × 68 mm {4.72 × 2.68 in}
(W × H).
❏
Do not use documents larger than 235 × 120 mm {9.25 × 4.72 in}
(W × H).
❏
Do not use documents whose thickness or weight is out of the
specified range.
❏
Do not use copy paper or other multi-ply paper.
❏
Make sure that the documents have no curl, bending (especially on
the corners), warpage, or wrinkles.
❏
Do not use checks with paper clips, staples, adhesive tape, or other
foreign materials attached.
❏
Do not open the covers while processing is in progress.
14 CaptureOne User's Manual
4
1
3
2