IoT SAFETY LIGHT
Auriculares inalámbricos
User manual
BXFL04
Use: In the event of a breakdown or accident, place the safety light on the guardrail, the
roof of the car, or a highly visible place on a motorcycle, such as the fuel tank. The device
is equipped with a magnetic fixing plate. Keep the device always within reach, in the car's
glove compartment or in your motorcycle bag.
Place the device in its position of use before getting out of the car, at the highest possible
point in order to be seen from further away.
Operation: Before using the device for the first time, pull the safety tab so that the alkaline
battery 9v (included) comes into contact with the device and provides power.
Power on: To switch on the device, turn the device's upper part from "OFF" to the lighting
indicator.
① Battery indicator.
② O indicator.
③ Lighting indicator.
Once turned on, the device emits an amber flash pattern visible up to one kilometer away.
In addition, thanks to its NB-IoT network, the device can provide special coverage
guaranteeing the transmission of its location to the DGT cloud.
Battery replacement: The indicator with a battery indicates when the battery needs to be
replaced.
①
① Rotate the upper part of the device towards the battery indicator and pull upwards.
② Replace the old battery with the new battery.
③ Shut the top of the device and turn it towards the "OFF" indicator.
②
③
②
①
③