Publicidad
Idiomas disponibles
Idiomas disponibles
Advice: Choose a location near an electrical outlet. Locate a point
high enough on the wall to allow the wand and motorized brush to
hang freely. Place the wall bracket against the wall and use a
pencil to mark the drill holes. Drill the holes (with a 1/4" drill bit) and
insert the drywall anchors. Insert screws through holes in bracket and
tighten until secure.
Drywall anchors
Screw
Assemble the device
Fully unfold the tube until it locks.
Insert the tube into the hole in the box until it locks. Make sure it is
oriented correctly.
Insert the desired accessory at the end of the tube until it locks.
Replace an accessory
Press the red tab on the tube.
Pull on the accessory to remove it.
Insert a new accessory into the tube until it locks.
EN-9
Publicidad
