Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
In case of mini-function, please refer to the following table
Issue
Blinking of
Rolling bar is wrapped.
all 3 power
Temperature is too high or too
indicator
low.
lights.
The
motorized
The brush is stuck with hair or
brush does
larger debris.
not work.
The battery needs to be
Shortened
replaced. The ambient
operating
temperature is too high or too
time.
low. The battery is not completely
charged.
The
The dust container is full the filter
vacuum
is clogged the suction inlet of the
cleaner
brush or other accessory is
has no
clogged Parts of the appliance
suction
are not completely dry after
power.
cleaning.
The ambient temperature when
No load
charging is too low or too high.
Possible causes
EN-15
The solution
Rolling bar clean-up.
Move the vacuum to the
appropriate temperature.
Make sure no hair or other
threads are caught
around the brush and
check the brush area for
large debris.
Contact the store or
service centre to replace
the battery grease at the
user's expense. Your
vacuum cleaner should
only be used in an
appropriate ambient
temperature. The battery
needs to be recharged.
Clean the dust bin after
use to avoid build-up.
Remove dust or debris
from filter Check for
blockages in brush and
other attachment points.
Make sure all components
are properly dried after
washing.
Charge the machine in the
right temperature
environment (5℃-40℃).
Publicidad
