Descargar Imprimir esta página

Eneo KBD-CSK-100 Instrucciones De Instalación Y Manejo página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

2. General Description
• Controls up to 55 Devices
• RS-4 / RS-485 Communication
• Multiple Protocol Supported in each Channel
• Programmable Presets, Tours, Patterns and others
• Built-in 3-Axis Proportional Joystick
• Easy Upload Programmed Data
• Built-in  Lines Character LCD Display
• Programmable Transmission Speed for each ID
• USB Mouse Function
• DVR Interface
• User Password Support
• Operate with 9V Battery
NOTE: Units should be set to the communication protocol and the same baud rate.
Before Installation
This keyboard system must be installed by qualified service and installation personnel.
Perform the following steps to install the keyboard system:
A. Unpack all components.
B. Place the keyboard in a convenient location.
NOTE:
Carefully and completely read the manuals for each piece of equipment before attempting to
install and connect the equipment.
C. Decide on the configuration method.
D. Use one of the following sections to configure the wiring.
2.1 Hardware Overview
• Hardware Components
This remote keyboard contains easy to use control keys on the front and simple input and output connectors on
the back.
• Control Buttons & Connection
The unit provides the primary operator interface. Most operations are one or two button presses.
The following Table contains a description for each buttons on the keyboard and port of cable connection.
Use Figure  and Figure  as a reference.
4

Publicidad

loading

Productos relacionados para Eneo KBD-CSK-100