3
Description
3.1
Product overview
3.2
Intended use
The product described is a hand-held cordless orbital-action jig saw. It is designed to be used for cutting
plastic, wood and metal as well as drywall board and gypsum fiberboard.
The product is equipped with a removable connector for an optional vacuum cleaner / dust removal hose.
This connector is designed to fit standard suction hoses. In order to connect the suction hose to the product,
use of a suitable adapter may be necessary.
•
For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
•
For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
•
Use this product only with saw blades equipped with a T-shank.
3.3
Possible misuse
•
Use of the product to cut off tree branches or to cut the trunk of a tree is not permissible.
•
Use of the product to cut hazardous materials is not permissible.
•
Use of the product in a damp or wet environment is not permissible.
▶ Keep objects such as paper clips, coins, keys, nails, screws, or other small metal objects, which could
cause a short circuit, away from the electric power supply for the dust removal module. A short circuit
between the contacts may result in burning injuries or fire.
3.4
Status indicators of the Liion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1
Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶ If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.
*2264214*
1
2264214
Lockbutton
@
On/off switch
;
Grip
=
Battery
%
Air vents
&
Installation opening for accessories
(
Stroke rate regulator thumbwheel
)
Saw blade release lever
+
Tool holder
§
Guard
/
Contact guard
:
Saw blade
∙
Anti-splinter insert
$
Orbital-action adjustment lever
£
Base plate
|
Cutting angle adjustment scale
¡
Catches
Q
Dust removal adapter
W
Release button, battery
E
Battery status indicator
R
English
21