Publicidad
Idiomas disponibles
Idiomas disponibles
Moving wheel
Step 1:
Take the front leg tube assembly (2) and install it with the main frame (1),
and then take the rear leg tube assembly (3) and install it with the
main frame. The front and rear leg pipe components are installed using (14)
M8X75 carriage screws and (15) ø8.5mm flat washers, (16) M8 cap nuts and
connected with an (22) open-end wrench. There is unevenness, which can
be adjusted to the overall flatness and stability by adjusting the multi-sided
adjustable foot cover on the rear foot tube assembly.
4
Multi-sided
adjustable
foot cover
EN
Publicidad
