Descargar Imprimir esta página

cecotec SEALVAC STEEL Manual De Instrucciones página 38

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
A. Roll storage chamber: chamber to place the roll of vacuum-seal bags.
B. Cutter: cut the bag to the size you want.
C. Bottom seal: seals the vacuum area and prevents leakage.
D. Rubber band: presses the bag against the sealing band.
E. Vacuum chamber: the end of the bag must be placed in the vacuum chamber for proper
operation.
Sealing band: 3 mm wide sealing band.
F.
G. Vacuum nozzle: when using vacuum canisters, bottle caps, or other external accessories,
insert the tube into this nozzle. Do not block the nozzle when using the appliance.
H. Opening button: press the buttons at both sides of the appliance to open the lid and
remove the packaged food.
Fig. 2
1. Mode button: with two settings ("Normal" and "Soft"). Press the mode button to switch
between the two settings. Use the "Soft" setting to pack delicate foods. You can control the
vacuum pressure in the bag by pressing "the Sealing button at any time. In the event of a
power cut, the appliance will return to the default ("Normal") setting.
2. Food button: with two settings ("Dry" and "Wet"). Press the Food button to switch between
the two settings. Select the settings according to the type of food to be packed. In the event
of a power cut, the appliance will return to the "Dry" setting.
3. Canister button: press this button when using canisters for vacuum packaging.
4. Marinade button: press this button to marinate food using vacuum cycles. You will get
intense flavours in a short time.
5. Vacuum & Sealing button: press this button to start the vacuum and sealing process (40
second pauses between uses are recommended).
6. Sealing button: press this button to seal the bag and prevent excessive pressure that could
crush delicate foods (40 second pauses between uses are recommended).
7. Stop button: allows you to stop the process at any time.
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the appliance
-
out of its box and remove all packaging materials. You can keep the original box and other
38
SEALVAC STEEL

Publicidad

loading

Este manual también es adecuado para:

04070