Publicidad
Idiomas disponibles
Idiomas disponibles
•
Check the power cable regularly for visible damage. If the
cord is damaged, it must be repaired by the official Cecotec
Technical Support Service to avoid any type of danger.
•
Do not use the appliance if its cable, plug, or housing are
damaged, nor after it malfunctions or has been dropped or
damaged in any way.
•
Do not twist, bend, pull, or damage the power cable. Protect
it from sharp edges and heat sources. Do not allow the
cable to touch hot surfaces. Do not let the cable hang over
the edge of the working surface or worktop.
•
This appliance is not intended to be operated by means of
an external timer or separate remote-control system.
•
Turn off and unplug the appliance from the mains supply
when not in use and before cleaning it.
•
Pull from the plug, not the cable, to disconnect it from the
outlet.
•
Do not use any accessory that has not been recommended
by Cecotec, as they might cause injuries or damage.
•
Place the appliance on a dry, stable, flat, heat-resistant
surface.
•
Unplug the appliance immediately if fire or smoke is
observed.
•
Never leave the appliance unattended while in use. Unplug
the appliance after use and when you leave the room where
it is installed.
•
Let the appliance rest for 40 seconds between uses.
•
Do not try to repair the appliance by yourself. Contact the
official Cecotec Technical Support Service for advice.
•
Cleaning and maintenance must be carried out according to
this instruction manual to make sure the appliance functions
properly. Turn off and unplug the appliance before moving
and cleaning it.
8
SEALVAC STEEL
Publicidad
