Publicidad
Idiomas disponibles
Idiomas disponibles
Status
One (1) LED quick-flashes red
3.4.2 Indicators showing the battery's state of health
To check the battery's state of health, press the release button and hold it
down for longer than three seconds. The system does not detect a potential
malfunction of the battery due to misuse, for example battery dropped or
pierced, external heat damage, etc.
Status
All LEDs show in sequence, fol-
lowed by one (1) LED showing con-
stantly green.
All LEDs show in sequence, fol-
lowed by one (1) LED quick-flashing
yellow.
All LEDs show in sequence, fol-
lowed by one (1) LED showing con-
stantly red.
4
Technical data
4.1 Product information
Rated voltage
Weight without battery
Torque adjustment
Rated speed under no load
Impact speed
Tool holder
10
English
Meaning
The Li-ion battery is locked and
cannot be used. Consult Hilti Ser-
vice.
Meaning
The battery can remain in use.
The check to ascertain the battery's
state of health did not complete.
Repeat the procedure, or consult
Hilti Service.
If a connected product can still be
used, the remaining battery capac-
ity is below 50 %.
If a connected product can no
longer be used, the battery has
reached the end of its useful life
and has to be replaced. Consult
Hilti Service.
21.6 V
1.8 kg
(4.0 lb)
2 settings
Mode I
0 /min ... 1,550 /min
Mode II
0 /min ... 1,750 /min
Mode I
3,100 /min
(51.7 Hz)
Mode II
3,500 /min
(58.3 Hz)
⁄
" square drive
1
2
2368301
*2368301*
Publicidad
