Publicidad
Idiomas disponibles
Idiomas disponibles
▶ Secure the retaining strap to the installation openings for accessories.
Check that it holds securely.
▶ Secure one carabiner of the tool tether to the retaining strap and secure
the second carabiner to a load-bearing structure. Check that both
carabiners hold securely.
Comply with the operating instructions of the Hilti retaining strap
and those of the Hilti tool tether.
6
Operation
Observe the safety instructions and warnings in this documentation and on
the product.
6.1 Setting forward or reverse rotation
▶ Set the forward/reverse switch to the desired direction of rotation.
▶ An interlock prevents switching while the motor is running.
▶ The control switch is locked when the forward/reverse switch is in
the middle position (switch-on interlock).
6.2 Setting the torque
CAUTION
Risk of injury by damaged workpieces! Screws or workpiece can be
damaged if torque is too high. This presents a risk of injury.
▶ Make sure that screws and workpiece are suitable for the torque
produced by the product.
▶ Push the torque selector button repeatedly until the desired torque
setting is displayed in the torque display.
If the product is connected to an intelligent torque module, AT shows
in the torque display and pressing the torque selector button has
no effect. Comply with the operating instructions of the intelligent
torque module.
6.3 Switching on and off
1. To switch the product on, press the control switch.
Speed can be controlled steplessly by varying how far the control
switch is pressed in.
2. To switch the product off, release the control switch.
*2368301*
5
2368301
4
English
13
Publicidad
