Publicidad
Idiomas disponibles
Idiomas disponibles
5) Install the bodyspray assembly by
pushing it firmly into the adapter
until it touches the finished wall
surface, making sure that the screw
holes are at 12, 3, 6, 9 o'clock and
the portion with two notches is at
12 o'clock.
6) Secure the bodyspray assembly to
the adapter with the four screws.
7)
Align the tab on the top of the back
of the faceplate with the top notch
on the bodyspray assembly. Push in
towards wall and turn the faceplate
clockwise until it locks in place.
8) Secure the faceplate with the included set
screw using 2mm hex wrench.
Installing the Body Spray (continued)
Screws
Escutcheon
Set Screw
2mm
Hex Wrench
5
Adapter/Outer
Plaster Guard
Body Spray
Assembly
Adapter/Outer
Plaster Guard
Notch
Convex
Publicidad
