Descargar Imprimir esta página

Weller WX 200 Manual De Usuario página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
WXP 200
Note
2.2
Intended use
Use the WXP 200 soldering iron exclusively for the purpose
indicated in the operating instructions of releasing, accommodating
and depositing electronic components under the conditions specified
herein. Intended use of the WXP 200 soldering iron also includes the
requirement that you
− adhere to these instructions,
− observe all other accompanying documents,
− comply with national accident prevention guidelines applicable at
the place of use.
The manufacturer accepts no liability for any damage resulting from
failure to use the device in compliance with these operating
instructions or unauthorised modifications to the device.
3 Included in delivery
WXP 200 (packed)
− Soldering iron WXP 200,
− 17 mm open end wrench
− XHT D chisel 5 X 1.2 mm
− Operating instructions of WXP 200
− Safety information booklet
Also included in WXP 200 soldering set
− WDH 31 safety rest
− Sole plate connector
− Operating instructions of WDC 2
4 Device description
4.1
Soldering iron WXP 200
The WXP 200 soldering iron is characterised by fast and precise
achievement of the soldering tip temperature. A highly powerful
200 W heater element provides excellent dynamic performance.
With its additional optimised sensor position, this soldering iron is
ideal for soldering applications requiring high heat.
Thanks to its slim-line design and the extremely short distance from
the handle to the tip, this soldering iron can be used for general
purposes from precision soldering to high-temperature soldering.
The WXP 200 is equipped with a usage detector and can be
automatically switched to standby mode or switched off when not in
use. The operating status is indicated by the status indicator LED.
For directions for setting the standby temperature and the switching
times, please refer to the operating instructions of the WX supply
unit in use.
The WXP 200 soldering iron by Weller may only be operated
together with Weller WX supply units.
5-8
T0052920599:
T0052920599
T0058741753
T0054480199
T0052920699:
T0051515898
T0058703153

Publicidad

loading