Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching The Blower Chute
•
Grasp blower chute with one hand and slide locking
rod on mounting bracket with other hand toward
engine. Use end of mounting bracket as leverage
when sliding the locking rod. See Figure 5.
•
Slip blower chute over rim of the discharge opening
and release locking rod to secure chute in place.
Make sure the safety switch button is fully
depressed by the front tab on the blower chute.
•
Raise the nozzle height to the highest setting when
using the blower chute. Refer to nozzle height
adjustment in the OPERATION section.
SECTION 3: KNOW YOUR YARD VACUUM
Starter Handle
Side Bracket
Handle Bracket
Hose Handle
Chipper Chute
Side Hanger
Bracket
Nozzle Height
Adjustment Lever
Read this operator's manual and safety rules before
operating your Yard Vacuum. Compare the illustrations
in Figure 6 with your unit to familiarize yourself with the
location of various controls and adjustments.
WARNING: The operation of any Yard
Vacuum can result in foreign objects
being thrown into the eyes, which can
result in severe eye damage. Always wear
safety glasses, provided with the Yard
Vacuum, for operating this equipment or
while performing any adjustments or
repairs on it.
(If Equipped)
Locking
Rod
Bag
Bag Handle
Figure 6
Starter Handle
The starter handle is attached to the right upper handle.
Stand behind unit and pull the starter handle to start
engine.
Bag
Collects shredded material fed through the chipper
chute or vacuumed through the nozzle or hose.
Bag Handle
Used to grasp bag in order to assist in attaching,
removing, and emptying bag.
7
Front
Tab
Front
Tab
Figure 5
Hose Assembly
Blower Chute
Nozzle
Blower
Chute
Locking
Rod
Nozzle/Hose
Vac Handle
Publicidad
