Publicidad
Idiomas disponibles
Idiomas disponibles
Light type:
Adapter:
Product Size:
Product weight:
Window size:
Wavelength:
Working environment:
Storage Environment:
Included:
Product description [page 2- f1]:
1. Place where impulses are released.
2. Ice Cooling area
3. Sensor (skin color and skin contact)
4. Air inlet
5. Air outlet
6. LCD display
7. Mode button
8. Power button
9. Light indicator
10. Adjusting the angle of inclination
11. Pulse emission button
12. Handle
13. Charging port
14. 1 cm2 Filter (for facial hair removal)
15. 2 cm2 Filter (for depilation of armpits and bikini area)
Operation procedure:
To obtain the best results, we suggest that before first use, read the user manual, including all safety rules
and warnings, in order to use the device correctly and safely. The B-Shine Ice hair removal device has
integrated filters that protect the skin against harmful radiation and burns during the hair removal treatment.
The rate of hair growth varies, depending on age, metabolism and other factors. Hair growth is usually
divided into three stages:
Growing phase
Hair actively grows along with the bulbs. At this stage, melanin concentration is the highest. Melanin
determines the formation of hair color. Melanin concentration is also a decisive factor in the effectiveness of
intensive pulsed light technology. Only hair in the growing phase will react to the light hair removal process.
Degeneration phase
Stopping hair growth and rooting the hair bulb.
Reconstruction phase
Mature hair detaches from the bulbs and falls out. The bulb is dormant until the next hair growth cycle.
In the first stage of hair removal with the B-Shine Ice device, light energy is used to act directly on the hair
bulbs below the skin. Melanin in the skin and hair bulbs absorb the pulsed light energy emitted by the
device. The darker the hair color, the more light energy is absorbed, and this process stimulates the hair
follicles to enter the dormant phase. In the second stage, during the depilation period, the hair will fall out
naturally, and regeneration will be inhibited, which may take 1-2 weeks. Only hair in the growing phase will
be removed. To effectively remove unwanted hair, you should repeat the depilation process once a week for
two months.
Display description:
Device Life: When turning on the device or 10 seconds without operation, the device will show the
remaining life. Calculation of working times: the light emission times will be shown on the LCD display. After
10 seconds without operation, the device will show the remaining life.
Working mode (6 modes):
1. HR: hair removal,
2. (HR + snowball icon): hair removal + Ice Cooling
3. SR: skin revitalization,
4. (SR + snowball icon): skin revitalization + Ice Cooling
5. AC: acne treatment
6. (AC+ snowball icon): acne treatment + Ice Cooling
Energy regulation:
Total 5 levels, energy intensity changes with different level.
Pulse Mode:
When the display shows one lightning icon, it means manual pulse mode.
When it shows two lightning icons, it means automatic pulse mode.
Countdown on the display after the device has finished working:
Long press the power button to turn off, the screen will show a 30 second countdown. During this period,
the fan continues to operate normally to dissipate heat. When the countdown ends, the device is completely
turned off.
Control panel specifications:
Power Button:
Intense Pulsing Light (IPL)
AC: 100-240V, 50/60Hz +/- 3Hz
DC: 12V | 6 A | 72 W
200 × 170.6 × 87.5 mm
0.5kg
4cm2 / 2cm2 / 1cm2
600nm
5-40OC humidity ≤75%
0-60OC humidity ≤75%
Device, adapter, user manual, safety glasses, razor,
cosmetic bag, 2 attachments for different body parts
8
EN
Publicidad
