BEAUTIFLY Shine-Ice Pro Serie Manual Del Usuario página 10

Hair
Brown
color
Skin
color
White 1-5
1-5
Beige
1-5
Light brown
1-3
Brown
Dark brown
Black
5. Start at a lower level and gradually increase until you start to feel pulses on your skin. You should not feel
any pain, the procedure should be pleasant.
6. The pulse output area is 4cm2. If it is suitable, please use it directly. If you want to perform the treatment
on smaller skin areas, such as armpits, the area above the upper lip, or a deep bikini area, you can use a
1cm2 and 2cm2 overlay.
7. Skin Tone Sensor: Every time the device is turned on, it is locked and cannot be operated. Please place
the pulse area close to the skin. When the red sensor light is off, it means the area has passed skin tone
detection and it is safe to use the device. After passing the skin tone test, the device will be unlocked and
intelligently automatically adjusted to the appropriate energy level (it is recommended to start at a low level
when used for the first few uses).
8. If you are using the device for the first time or on a new area of the body, select a small area near the
area you intend to treat to perform a skin sensitivity test. Use the lowest device level. Follow the treatment
instructions below, but emit no more than 2-3 pulses. After performing the skin test, wait 60 minutes
and check if the skin does not react. If after 60 minutes the skin appears normal and there is no redness or
other skin reaction, you are ready for the full treatment.
If your device does not detect your skin tone when you turn it on, your device will not be unlocked
and you will not be able to operate it.
Product manual:
1. Use a hand razor to shave off unwanted hair.
2. Plug in the power plug, press and hold the power button to turn on the device, press the power button
and set the appropriate energy, start from level.
3. Wear glasses to avoid light damage to your eyes. Make sure the light outlet touches your skin, press the
emission button. More details can be found in the "Operating Procedure" section.
Series of treatments:
Make sure the pulse outlet touches the skin, press the emission button. The full hair removal cycle lasts 8
weeks. It is normal for hair to continue to grow after the first few uses. A whole series of treatments should
be performed.
Treatment frequency:
- (1-4 weeks) - 2 times a week
- (5-8 weeks) - once every 1-2 weeks
- (8 weeks or more) - 1 time in half or one month
1. To effectively remove visible hair and prevent active growth of hair follicles, epilation should be performed
at least once every 2 weeks during the first 2 months after the epilation phase.
2. Use it repeatedly according to your hair growth. A person with a hard beard can increase their energy
levels and increase their frequency accordingly. Different frequency of use due to different hair growth.
3. Subsequent treatments
* To ensure long-term smoothness of the skin, it is recommended to perform hair removal treatment every
4-6 weeks as a reminder after the series.
Operation procedure:
Hair removal
Application:
- Mustache, armpit hair, body and leg hair, hairline hair on the forehead and bikini area.
- The effect varies depending on skin color. The device is not suitable for white and light colors.
How often to perform hair removal treatment:
Usually it is about 7-9 treatments. Perform the first 3 treatments once a week. For the next 4-9 treatments,
perform one therapy every 2-3 weeks. To maintain the effect of hair removal and to prevent the hair follicles
from becoming active again, the treatments should be repeated regularly to ensure that the skin remains
smooth. If treatments are not continued, the hair follicles will become active again and the hair will begin to
grow back. To maintain the results, simply repeat the treatments every 4-8 weeks to ensure that the hair
follicles do not become activated and hair regrowth remains inhibited. The intervals between treatments
may vary depending on the individual rate of hair regrowth.
How to perform a hair removal treatment:
Black
Dark brown
1-5 1-5
1-5 1-5
1-5 1-5
1-3 1-3
10
Dark gold Pale gold
1-5
1-5
1-5
1-3
EN
Red White/gray