Freezer Features; Freezer Shelf; Freezer Bin; Door Features - Sears Kenmore 106.5175 Serie Manual De Uso Y Cuidado

FRUIT (left side) (open) lets moist air out of the crisper for best
storage of fruits and vegetables with skins.
Fruit: Wash, let dry and store in refrigerator in plastic bag
■
or crisper. Do not wash or hull berries until they are ready
to use. Sort and keep berries in original container in crisper,
or store in a loosely closed paper bag on a refrigerator
shelf.
Vegetables with skins: Place in plastic bag or plastic
■
container and store in crisper.
VEGETABLES (right side) (closed) keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
Leafy vegetables: Wash in cold water, drain and trim or
■
tear off bruised and discolored areas. Place in plastic bag
or plastic container and store in crisper.

FREEZER FEATURES

Your model may have some or all of these features.
Frozen Food Storage Guide
Storage times will vary according to the quality and type of
food, the type of packaging or wrap used (should be airtight and
moisture-proof), and the storage temperature. Ice crystals inside a
sealed package are normal. This simply means that moisture in the
food and air inside the package have condensed, creating
ice crystals.
Put no more unfrozen food into the freezer than will freeze within
24 hours (no more than 2 to 3 lbs of food per cubic foot [907 to
1,350 g per 28 L] of freezer space). Leave enough space in the
freezer for air to circulate around packages. Be certain to leave
enough room for the door to close tightly.
For more information on preparing food for freezing, check a
freezer guide or reliable cookbook.

Freezer Shelf

(number of shelves varies by model)
To Remove and Replace the Bottom Shelf
1. Lift up the front and back of the shelf, and remove from the
cabinet. Be sure not to remove the retaining rods.
2. Replace the shelf aligning the rods with the cabinet ribs.
Apply a little pressure on the shelf to attach the rods to the
ribs of the cabinet.
To Remove and Replace the Mid and Top Shelf
1. With your hand, push the shelf from bottom to top until it is
released from the holding rod. Pull the shelf until it is released
from the rear rod. Remove from the cabinet.
2. To replace the shelf:
Replace rods into the support holes. Push the rods down so
■
it clicks into the hole.
Identify the front and rear trim of the shelf.
■
Place the rear trim on the rear rod and push the shelf so
■
it clicks the rod into the trim rear. (Keep the front raised
while pushing.)
Lower the front of the shelf until the front trim is on the rod
■
and push the shelf down so it clicks the rod into the trim rear.
NOTE: Be sure that both sides of the shelf are positioned
evenly in the shelf support holes and the shelf is secure.

Freezer Bin

(on some models)
The freezer bin can be used to store bags of frozen fruits and
vegetables that may slide off freezer shelves.
To Remove and Replace the Freezer Bin:
1. Remove the bin by sliding it out to the stop. Lift the front to
slide the bin out the rest of the way.
2. Replace the bin by positioning it on the rails. Lift the bin front
slightly while pushing it in fully past the stops.

DOOR FEATURES

Your model may have some or all of these features.

Door Bins

(on some models)
To Remove and Replace the Bins:
1. Remove the bin by lifting it and pulling it straight out.
17