cecotec CONGA ROCKSTAR 1600 X-TREME Manual De Instrucciones página 25

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Vacuuming brush head release button
2. Vacuuming tube release button
3. Dust tank bottom cover unlock button
4. Dust tank opening button and filter access
5. On/Off button
6. Power adapter
7. 2-in-1 narrow accessory for corners and furniture
8. Jaliscazo brush
9. Vacuuming brush head
10. Vacuuming tube
Fig. 2
1. Display
2. Speed-control dial
3. On/Off push button
4. Battery
5. Battery release button
2. BEFORE USE
- This upright vacuum cleaner includes a package designed to protect it during transport.
Take the product out of the box and remove all packaging materials. Keep the original box
and other elements in a safe place, as this will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
Fully charge the device before the first use.
-
Remove the first-use tab installed in the filter.
-
During the first 3 uses, it is recommended to charge the device for 12 hours between uses.
-
The normal charge time is 5 hours approx. When the battery is fully charged, unplug it.
-
Box contents
Conga Rockstar 1600 X-Treme vacuum cleaner
-
2-in-1 narrow accessory for corners and furniture
-
Jaliscazo brush
-
48
Vacuuming tube
-
Charger
-
Instruction manual
-
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
To install the vacuuming brush head into the vacuuming tube, align both of them making
-
sure the tab on the brush head matches the guides on the tube, and introduce one into the
other until they are firmly fixed.
To disassemble them, press the vacuuming brush head release button and pull from the
-
vacuuming tube while you hold the vacuuming brush head.
Warning
When assembling these two parts, make sure the handle and the brush head are facing the
same direction.
Vacuuming tube, vacuuming brush head and main body assembly
To complete the installation of the upright vacuum cleaner, hold the vacuuming tube in an
upright position and insert it into the main body.
Battery assembly
Fig. 3
Introduce the battery in the slot located in the main body following the guides. Once it is
-
introduced, it will click into place. Once inserted, check that it is secured in position.
To disassemble the battery, press the release button and remove the battery.
-
Warning
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
4. OPERATION
You can use this vacuum cleaner in two different manners:
Handheld vacuum cleaner, attaching the accessories directly to the main body.
-
Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
-
Using the vacuum cleaner
Press the power button to turn the device on or off.
-
ENGLISH
CONGA ROCKSTAR 1600 X-TREME 49