5.
Dynamic color wave (cyan, purple, yellow)
6.
Color fade (red, green, blue)
7.
Color pulse (red)
8.
Color pulse (blue)
9.
Color pulse (green)
10. Color pulse (white)
• Press and hold to cycle through all the dynamic modes one by one.
• To cancel dynamic mode, touch the color wheel.
SATURATION:
• Press to fully increase/decrease the saturation of the selected color.
• Press and hold to gradually change the saturation until you have reached your
desired level.
COLOR SELECT
• Press to manually scroll through seven main colors. The color will change in the
following order: red, yellow, green, cyan, blue, purple, white.
• Press and hold to reset the color back to red.
BRIGHTNESS/SPEED:
• During normal use, use the +/- buttons to adjust the brightness of the selected zone.
• During dynamic mode, use the +/- buttons to adjust the speed of the dynamic mode.
MOUNTING INSTALLATION
This remote comes with a remote holder for convenience. You can mount the remote
holder in two different ways:
• Option 1: Use two screws to attach the holder to the wall.
• Option 2: Use adhesive paste to stick the holder to the wall.
www.newair.com
EN
15