Warning: Do not damage the refrigerant circuit and never use an appliance with a
damaged refrigerant circuit! If the refrigerant circuit becomes damaged, avoid
proximity to open fires and all types of heat and ignition sources. Thoroughly ventilate
the room in which the appliance is located.
• It is hazardous for anyone other than an authorized service person to service this
appliance.
• The room for installing the appliance must be at least 11 square feet per 0.3oz of
refrigerant. The amount and type of refrigerant in the appliance can be found in the
Technical Specifications.
GENERAL SAFETY
• Do not use other electrical appliances inside of refrigerating appliances, unless they
are approved for this purpose by the manufacturer
• Do not store explosive substances such as aerosol cans with a flammable propellant
in this appliance.
• During transportation and installation of the appliance, make certain that none of the
components of the refrigerant circuit are damaged.
• Thoroughly ventilate the room in which the appliance is situated.
• It is dangerous to alter the specifications or modify this product in any way.
• Any damage to the cord may cause a short circuit, fire, and/or electric shock.
Warning: This appliance is heavy. Care should be taken when moving it. To avoid back
or other injury, consider a two-person lift or mechanical aid when installing it. Failure to
do so can result in back or other injury.
• Avoid prolonged exposure to direct sunlight
• This appliance is intended to be used in households only.
Warning: Do not use an extension cord.
• Any electrical components (plug power cord, compressor, etc.) must be replaced by a
certified service agent or qualified service personnel
• Make sure that the power plug is not squashed or damaged by the back of the
appliance. A damaged power plug may overheat and cause a fire.
• Before first use, it is advisable to wait at least eight hours before connecting the
appliance to allow the oil to flow back into the compressor.
• Adequate air circulation should be allowed around the appliance. Inadequate air
circulation leads to overheating. To achieve sufficient ventilation, follow the
installation instructions included in this manual.
• The appliance must not be located close to radiators or stoves.
• Make sure that the main plug is accessible after installing the appliance.
DAILY USE
• Do not put hot food in the appliance.
• Store pre-packed food in accordance with the food manufacturer's instructions.
Warning: Do not use mechanical devices or other means to accelerate the defrosting
process. Never use sharp or metal instruments to remove frost or clean the appliance.
Use a plastic scraper if necessary.
www.newair.com
EN
7