Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
The beverage fridge does
not cool.
The beverage fridge is
not cold enough.
The beverage fridge
seems to make too much
noise.
An interior red light is
flashing.
Frost is building up in the
unit.
www.newair.com
Possible Causes
The unit may be plugged
into a wall unit using a
different voltage.
The circuit breaker may be
tripped or there is a blown
fuse.
The external environment
may require a higher
setting.
The fridge may be placed
too close to a heat source.
There is insufficient
ventilation.
The door is not completely
closed, or the door seal is
not working properly.
The unit is not level.
There is insufficient
ventilation. The unit is too
close to a wall or another
surface.
The temperature is set too
low.
There is excess humidity,
or the interior temperature
is too low.
Solution
Check if using the wrong
voltage.
Reset the circuit breaker
and check for a broken fuse.
Lower the temperature of
the fridge.
Keep the fridge away from
direct sunlight and other
heat sources.
Place the beverage fridge in
an area with proper
ventilation and clearances.
Close the door tightly. Do
not open the door
frequently, and do not keep
the door open for extended
periods of time. Replace the
seal on the door if
necessary.
Adjust the unit's feet and
ensure the product is level.
Allow sufficient clearance
around the unit.
Adjust the temperature so
that it is higher than the
beverage fridge's interior
temperature.
Turn off the beverage
fridge, unplug it, and
remove the frost buildup
manually. Reconnect the
power once the ice has
thawed.
EN
18
Publicidad
