Publicidad
Idiomas disponibles
Idiomas disponibles
Function setting
▪
Power button
light showing "ON" or "OFF" when the corresponding mode is chosen (when the indoor
humidity reaches the set value, the compressor will stop running, and the running
indicator will flash at this time).
▪
Fan speed setting
comfortable speed. When the device is turned on, press the [SPEED] key to switch
between wind speeds. The humidity and wind speed cannot be set in the drying mode,
and the strong wind speed is automatically selected.
▪
Mode setting
mode, continuous dehumidifier mode. In the power-on state, press the [MODE] button
and the device will cycle through the dehumidifier, drying, and continuous dehumidifier
modes.
The working mode can be switched according to feature preference:
−
Dehumidification mode: humidity and wind speed can be set.
−
Drying mode: Humidity and wind speed cannot be set.
−
Continuous dehumidification mode: the humidity cannot be set, but the wind speed
can be set.
▪
Humidity setting
[HUMI] key once to enter the set humidity viewing state; "
humidity value. During the flashing period of "
Value. The setting range is 30-80% RH, which can be set cyclically. Press the [HUMI] key
once, and the set humidity value will increase by 5% RH. After 5seconds of no key
operation or pressing other keys, it will automatically confirm and exit, and "
the current ambient humidity. When the humidity level is set at 30%RH, the dehumidifier
will be work at continuous dehumidifying mode.
▪
Lock settings
control the activation and deactivation of the child lock. After entering the child lock
state, all other key operations stop working. You can only release it by long pressing the
[LOCK] button for 3 seconds.
Timing settings
▪
turn on; if it is set when the device is on, the timer will be set to turn off the device.
Press the "TIMER" button to set the timer. Each time you press it, the timer increases by
1h. The setting range is 1~24h, which can be set cyclically. Press and hold the "TIMER"
for a few seconds to continuously adjust the timer; when the timer is 00, it is invalid.
:
This button is used to turn the machine ON/OFF with the indicator
: There are two types of wind speed
:
The device has three working modes: dehumidifier mode, drying
:
In dehumidification mode (other modes are invalid), press the
:
In the on or off state, long press the [LOCK] button for 3 seconds to
:
If the timer is set when the device is off, the timer will be set to
", press [HUMI] to set the humidity.
10
: strong speed and a
" flashes to display the set
" displays
Publicidad
