Descargar Imprimir esta página

HAEGER Digi Desumi 10 DE-D10.012A Instrucciones De Uso página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
1. Take out the water tank.
2. Hold the filter screen as shown in the image and pull down the filter screen.
3. Clean the filter: Use a vacuum cleaner to gently absorb the dust on the surface of
the filter. If the filter is very dirty, wipe it with warm water and a mild detergent
and dry it completely.
4. As shown in the picture, insert the filter from bottom to top and insert it into the
filter slot in the front shell.
5. Reinstall the water tank.
C - Dehumidifier storage
When you want to store the dehumidifier because you don't use it for a long time.
Please pay attention to the following steps:
1. Empty the water in the water tank.
2. Roll up the power cord and tie it up.
3. Clean the filter.
4. Place the machine in a cool and dry environment.
Troubleshooting
COMMON FAULTS AND SOLUTIONS
Check the information below for troubleshooting steps, it will save you time to resolve
issues that may happen with the unit.
The list includes most of the common cases, but not the results of defective unit, crafts
or materials in the unit.
If all troubleshooting steps have been exhausted and the issue is still occurring, please
feel free to reach out to Customer Service to get further assistance.
14

Publicidad

loading