Publicidad
Idiomas disponibles
Idiomas disponibles
Before the first use
•
Take the appliance and accessories out the box. Remove the protective foil or plastic
from the device if any.
•
Check that the accessories are complete and the unit is not damaged. Then pour a
little water into the jar and mix according to the steps below for one or two times,
then pour out, cleaning the jar and the jar lid thoroughly with warm water.
•
The blender is equipped with a security function. The blender can only be switched
on if the jar is locked in the base unit correctly.
•
Warning: the blade is sharp, handle it carefully.
Use of the device
1. Place the motor unit on the flat surface. Make sure the power outlet is unplugged.
2. Place the jar on a flat surface with the open ending facing up.
Fill the jar with your favourite ingredients. Be sure not to fill
ingredients exceed the 600ml marking.
Note: for optimal performance, place desired ingredients in
the jar according to the following order: liquids, fresh
ingredients, frozen fruit, yogurt and ice cream.
3. It must be noted that peeled or cored the fruit or vegetables
and then cut it into small dices; general the size of fruit or
vegetable dices is 15mm. Fruit or vegetable seeds should be edible, such as carrot,
strawberry, pineapple, lemon, grape, tomato.
Note: never use boiling liquids or run the appliance empty.
4. Assemble the blade assembly on the opening end of the jar by
turning it in clockwise.
5. Upend the assembly of jar and blade assembly, and insert them
into the motor unit, make sure arrow on the motor unit align
with the blade assembly, then turn the assembly in clockwise
to lock them.
6. Connect the plug to wall outlet. Depress and hold the pulse
button to process.
Note: Do not run the appliance for more than 1 minutes per time. Before it is used again,
it must cool down enough.
7. When the operation is finished, turning the jar assembly in anti-clockwise to remove
them. Then unplug the power outlet.
8. Upend the jar assembly, hand the jar with one hand, and turning the blade assembly
in anticlockwise with the other hand to remove it.
9. Then assemble the jar lid on the jar. Take the jar with you throughout the day to stay
hydrated. When you need to drink, you just need to open the spout lid to serve easily.
3
English -
Publicidad
