Create HUM IZEN PRO Manual Del Usuario página 11

PROBLEM
Power lamp is off when
switched on.
Power lamp is on when
switched on, but no mist
comes out.
Water shortage indicator
is on.
Humidifier produces an
unusual smell.
Humidifier makes a loud
or unusual sound.
The humidification
capacity is too low.
TROUBLESHOOTING
POSSIBLE CAUSE
Humidifier is not plugged in.
Power cord is damaged.
Humidifier is defective or malfunc-
tioning.
Humidifier is not turned on.
The target humidity is reached.
No water in the tank.
Water level is low.
The water level required has not yet
reached the vaporization compart-
ment.
The water tank isn't well positioned.
The humidifier isn't on a flat sur-
face.
Humidifier is new.
Dirty water or water sitting too long. Clean water tank, fill with clear water.
Residual smell from diffusing aro-
ma oil on the aroma cotton.
Resonant in water tank when water
is too low.
Humidifier is on an unstable sur-
face.
Water tank is positioned incorrectly.
Humidifier is malfunctioning.
There is natural or artificial air re-
placement in the room which inter-
fere the increase of %RH.
The air inlet grids and nozzle could
be blocked.
Too much scale in the water tank.
The humidity selected rate is too
low.
Water is too dirty or water kept too
long in the tank.
SUGGESTED SOLUTION
Plug the humidifier into a powered
electrical socket.
Immediately stop using and contact
Customer Support.
Press the power button to turn it on.
Increase the target humidity or change
mode.
Refill the water tank and wait at least
1 minute.
Wait at least 1 minute.
Check the positioning of tank on the
base.
Check the positioning of the humidifier.
Take out water tank, open cover, let it
stay 12 hours in cool position.
Remove the aroma cotton, rinse it un-
der clean water and allow it to dry.
Fill water into water tank.
Move the humidifier to a stable flat
surface.
Turn off and unplug the humidifier,
then align the water tank cover with its
respective opening in the inner cham-
ber.
Immediately stop using and contact
Customer Support.
Check if doors and windows are closed.
Check if there is no air conditioning
working in the room.
Remove any blocking items from the
grids and the nozzle.
Clean transducer.
Increase mist output speed.
Increase humidity setting rate.
Clean water tank, change to fresh
clear water.
E NGLI SH
11