Descargar Imprimir esta página

Smarthome EM Serie Manual De Instalación, Uso Y Cuidado página 24

Mini tanque calentador de agua

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
Error Codes on the Front Panel and the App
app, it will explain how you can interact with
button and it will blink in a sequence based on
the error it is reporting.
Thermostat Malfunction
When the Mini reports an E1 Error, the power
service.
Rapid Temperature Increase
When the Mini reports an E2 Error, the power
pause for three (3) seconds before repeating
caused by the Mini not being full with water.
with water, and reconnect the Mini to power to
resolve this issue. If the E2 error code does not
for further assistance.
though it is plugged in, check the reset button
toggled into the reset postition. If the reset
button is not toggled to the reset position,
assistance.
PLEASE NOTE: MINI TANKS ARE FOR INDOOR PERMANENT INSTALLATIONS ONLY.
AND ALL AIR IS
REMOVED.THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
23
Support: Support.Eccotemp.com
SMARTHOME Mini Tank can
Shop Online: www.Eccotemp.com
you will see the power button on
the front of the Mini Tank blinking
red for up to 60 seconds while it
connects. If it is unable to connect
In the event that your water heater
Farenheit. Your app will be able to
tell you if your heater has connected
successfully.
BEFORE POWERING THE WATER HEATER, BE SURE THAT THE SYSTEM IS COMPLETELY FILLED WITH WATER
SMARTHOME
Phone: 866-356-1992

Publicidad

loading

Productos relacionados para Smarthome EM Serie

Este manual también es adecuado para:

Esh serieEsh-2.5Esh-4.0