Metabo RC 12-18 32W BT DAB+ Manual Original página 13

•Listening to stored radio stations:
Press "STATION" button (5) briefly until the
desired stored radio station is shown on the
display (12) and played.
7.5 Operation: DAB/DAB+ (Digital Audio
Broadcasting) (depending on features)
Press the "MODE" button (1) to set "DAB".
• Station scan - Starts automatically on initial
commissioning!
(If required, start manually:
Press "MENU" button (2) and select "Auto Scan"
by turning the (3) knob. Confirm the selection by
briefly pressing the (3) button, the station search
starts.)
• Set the desired station:
After the automatic station search, all stations
found are automatically stored, using the "|<<"
button (6) and ">>|" button (7) you can browse the
stations received.
Note: In order to set a specific station of which
you know the transmission frequency: Press the
"MENU" button (2) and select "Manual tune" by
turning the knob (3). Confirm the selection by
briefly pressing the (3) button. Select the desired
transmission frequency by turning the button (3)
and confirm the selection by briefly pressing the
knob (3).
• Store set radio station
Press the "STATION" button (5) for a long time.
The selected memory number blinks on the
display (12).
Rem.: The radio station can only be stored as
long as the number is blinking.
Set the desired memory location number by
turning the (3) knob.
Press the (3) button briefly to save the radio
station.
Note: DAB / DAB+ is not transmitted in all countries
or areas and cannot be received then.
7.6 Bluetooth (connect radio to smart
phone)
1. Press the "BLUETOOTH" button (8). The display
shows (12) BT.
2. Activate Bluetooth on your smart phone (or
another mobile device such as a tablet).
3. If your smart phone has detected the radio, it will
be shown with the device name "RC 12-18 32W
BT".
4. On your smart phone establish the connection to
the device "RC 12-18 32W BT".
The successful connection is shown on the
display (12).
5. Start replay e.g. of a song on your smart phone.
6. Pause or restart playback by pressing the button
(8).
Note: For pairing of 2 radios, see chapter 7.7.
7.7 Bluetooth (pairing 2 radios)
In BT (Bluetooth) mode, you can pair another radio
of this series and thus play back music via both
devices simultaneously.
1. Connect the FIRST radio with your smart phone
(as described in chapter 7.6).
2. Then press the button (9) on the FIRST radio.
3. Proceed to the SECOND radio and activate
Bluetooth by pressing the "BLUETOOTH" button
(8) and then press the (9) button to connect both
radios.
4. Both radios are automatically connected to each
other (If there are connection problems,
reduce the distance between the radios).
5. Start replay e.g. of a song on your smart phone.
7.8 AUX (connect radio and smart phone
with a cable)
1. Open the cover (13) and plug a smart phone with
a suitable cable into the AUX socket (14).
2. Press the "MODE" button (1) several times until
the display (12) shows "AUX".
3. Start replay e.g. of a song on your smart phone.
7.9 Set "PRE-EQUALIZER", TREBLE and
BASS
"PRE-EQUALIZER" is a fixed, predefined value for
treble and bass.
Press the "EQ" button (4) several times to switch
between "PRE-EQUALIZER", treble and bass .
The active mode is shown in the display (12).
The set value (for treble and bass) is shown in the
display (12) and can be changed by turning the
knob (3).
Once the requested values have been set, you can
switch from treble to bass by briefly pressing the
button (3) or exit the menu.
7.10 Further setting options:
Scan tuning:
1. Press the "MODE" button (1) several times to set
the requested mode (FM / DAB). The set mode
is shown in the display (12).
2. Set the "MENU" button (2), by turning the button
(3) go to the sub-item "AUTO SCAN". By briefly
pressing the (3) button to start the scan tuning.
"Manual tune" (only when "DAB" is set):
To tune a specific station of which you know the
transmission frequency. See chapter 7.5.
Display settings:
Note: Some information is not broadcast by certain
stations and cannot be displayed by the radio.
1. Press the "MODE" button (1) several times to set
the requested mode (FM / DAB). The set mode
is shown in the display (12).
2. Press the "MENU" button (2), by turning the (3)
button go to sub-item "DISPLAY TYPE". Briefly
pressing the (3) button takes you to the selection
menu.
in FM mode:
PROGRAM TYPE = music genre, e.g. pop
music
RADIO TEXT = Information broadcasted by the
station
PROGRAM SERVICE = station name
in DAB mode:
PROGRAM TYPE = music genre, e.g. pop
ENGLISH en
13