Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions. Only use original Metabo battery packs
and Metabo accessories.
For a complete range of accessories, see
www.metabo.com or the catalogue.
11. Repairs
Repairs to radios must only be carried out by
qualified electricians!
If the mains connection cable of this device is
damaged, it must be replaced by the manufacturer
or the Customer Service department of the
manufacturer or a similarly qualified person to
prevent endangering personnel and property.
Contact your local Metabo representative if you
have Metabo radios requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
12. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Packaging materials must be disposed of according
to their labelling in accordance with municipal
guidelines. Further information can be found at
www.metabo.com in the "Service" section.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
13. Technical specifications
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
FM (UKW) = ultra shortwave reception range
U
= operating voltage
I
= max. charging current battery pack
A
I
= max. charging current of the USB-C
USB-C
connection
I
= max. charging current during
IL
inductive charging
m
= weight (without battery pack)
IP
= protection class IP
direct current
~
AC power
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Permitted ambient temperature during operation:
-20 °C to 40 °C.
Recommended ambient temperature when
charging Battery pack: 0 °C to 40 °C.
ENGLISH en
15