Descargar Imprimir esta página

Bosch BSH180-01 Instrucciones De Funcionamiento Y Seguridad página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

BM 2610034438 03-14_BSH180 3/27/14 1:59 PM Page 10
TYPICAL APPLICATION
1. Keep the blade off the workpiece until the
motor has reached full speed.
2. Start cutting on a surface where the
greatest number of teeth will be in contact
with the workpiece at one time (Fig. 5).
3. Place the material guide against the
workpiece and lower the moving saw blade
into the cut.
4. Do not apply pressure when cutting. The
weight of the tool will supply adequate
pressure for the fastest cutting.
5. When completing a cut, hold the tool firmly
so it will not fall against the workpiece.
Your tool is equipped with a secondary locking
latch to prevent the battery pack from
completely falling out of the handle, should it
become loose due to vibration.
To remove the battery pack, press the battery
pack release button and slide the battery pack
forward.
INSERTING AND RELEASING BATTERY PACK
CORRECT
Press the battery pack release button again
and slide the battery pack completely out of
tool housing (Fig. 1).
-10-
FIG. 5
INCORRECT

Publicidad

loading

Este manual también es adecuado para:

Bsh180