NAVEE V25i Pro Manual De Instrucciones página 4

The A-weighted emission sound pressure level is less than 70 dB(A).
EN ·
The mechanical vibrations transmitted by KickScooter are less than 2.5 m/s².
·
For a better riding experience, it is recommended to carry out a regular maintenance of the product.
·
Eliminate any sharp edges caused by use.
·
Accessories and any additional items which are not approved by the manufacturer shall not be used.
·
Regular maintenance of the vehicle is a factor of safety.
·
The self-tightening nuts as well as the other self-tightening fastenings may lose their efficiency and that they may
·
need to be retightened.
Regularly check the tightening of the various bolted elements, in particular the wheel axles, the folding system,
·
the steering system and the brake shaft.
Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and rear
·
brake.
Do not make any modifications that are not noted in the instructions.
·
Make sure the scooter is turned off when being transported and kept in its original packaging if possible.
·
In order to avoid accidental injuries such as electric shock and fire caused by improper use, please read the
·
instructions carefully before use, and keep them properly for future reference.
Please use this product in accordance with the instructions in the User Manual. Users are responsible for any loss
·
or damage arising from improper use of this product.
Power-off the vehicle during charging, or into a certain nonoperational mode.
·
Do not charge if the charge port or charge cable is wet. Read this manual carefully before charging.
·
Do not charge the scooter at an ambient temperature above 40°C or below 0°C.
·
Please keep a safe distance when the scooter is driving on a level/no slope road. The braking distance will
·
increase in wet weather.
The shock absorption of this product is not adjustable (if applicable).
·
The appliance is not intended for use at elevations greater than 2000 m above sea level.
·
The appliance shall be disconnected from its power source during service and when replacing parts.
·
The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer
·
shall be scrapped.
If the external flexible cable or cord of this transformer is damaged, it shall be replaced by the manufacturer or
·
their service agent or a similarly qualified person in order to avoid a hazard.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
·
persons in order to avoid a hazard.
This product contains batteries that can only be replaced by qualified technicians or after-sales service
·
This appliance contains batteries that are only replaceable by skilled persons.
·
WARNING! For the purposes of recharging the battery, only use
·
the detachable supply unit provided with this appliance. Do
not use a battery charger from any other product. Keep a safe
03
distance from the surrounding combustibles when charging,
the vehicle must be placed in a well-ventilated area.
WARNING! Do not use any third-party battery or battery
·
charger. Use only with LI-0554200130NA supply unit.
WARNING! Keep plastic covering away from children to avoid
·
suffocation.
WARNING! Never use the product close to a water source.
·
WARNING! Stop using the product when damaged.
·
WARNING! As with any mechanical component, a vehicle is
·
subject to high stresses and wear. The various materials and
components may react differently to wear or fatigue. If the
expected service life for a component has been exceeded, it
may break suddenly, therefore risking causing injuries to the
user. Cracks, scratches and discoloration in the areas subject
to high stresses indicate that the component has exceeded its
service life and please contact an authorized or a specialized
repairer.
detachable power supply part
Environmental Instructions
The scooter contains a rechargeable lithium-ion battery pack, and improper disposal of these batteries will cause
harm to the environment. Follow the steps below to remove the batteries before disposing of the scooter and
discard the batteries properly:
1. Before removing the battery, power off and drain it to the full extent. Then tear the footpad and unscrew the
fixing bolts between the pedal and frame to open the foot pedal.
2. Unplug the battery connector, and then remove the batteries. Do not damage the battery case to avoid any risk
of injuries. Do not use the battery if it is damaged, has a strange odor, emits smoke, or gets overheated. Keep a
leaking battery away from other objects.
3. Discard the removed batteries at a professional recycling facility.
To find a qualified service shop, contact us via service@navee.tech/www.naveetech.com
EN
04