Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL SAFET Y
Do not use this product
in locations with
different electrical
specifications or plug
types. Do not operate
with any type of plug
adapter or voltage
converter device,
as these may cause
electrical shorting, fire,
electric shock, personal
injury, or product
damage.
• The use of attachments,
including canning jars, is
not recommended and
may cause fire, electric
shock, personal injury,
or product damage and
will void the product's
warranty.
• To avoid the risk of
electric shock, never
immerse the cord, plug,
or motor base of the
nutribullet
Smart Touch
®
Blender™ Combo in
water or other liquids.
Discontinue use if the
cord, plug, or motor
base is damaged.
POWER OFF
• Always
and
UNPLUG
the
8
nutribullet
Smart
®
Touch Blender™ Combo
when it is not in use or
BEFORE
assembling,
disassembling, changing
accessories, or cleaning.
Do not attempt to
handle the nutribullet
®
Smart Touch Blender™
Combo until all parts
have stopped moving.
• Always disconnect
the appliance from
the supply if it is left
unattended and
before assembling,
disassembling or
cleaning.
• Switch off the appliance
and disconnect from
power supply before
changing accessories or
handling moving parts.
• CAUTION: In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer,
or connected to a
circuit that is regularly
switched on and off by
the utility.
• To unplug, grasp the
plug and pull from the
outlet. Never pull from
the power cord.
• The Smart Touch
Blender™ Combo
is ready to operate
when unit is plugged
in and power icon is
illuminated. Avoid
inadvertent contact with
the touch screen display.
• Do not allow the cord to
hang over the edge of
the table or counter. Do
not pull, twist, or damage
the power cord. Do not
allow the cord to touch
hot surfaces, including
the stove.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
qualified persons in
order to avoid a hazard.
• If the motor stops
working, unplug the
motor base and let
it cool for at least
15 minutes before
attempting to use it
again. Your nutribullet
®
has an internal thermal
breaker that shuts
off the motor when it
overheats. The thermal
breaker will reset when
the unit is unplugged,
and the thermal breaker
cools down sufficiently.
• This appliance has
important markings on
the plug. The attachment
plug or entire cord
set is not suitable
for replacement. If
damaged, the appliance
will be replaced.
STOVE-TOP
HEATING SAFET Y
Do not blend hot
ingredients in any sealed
nutribullet
cup!
®
To heat items that
have been blended at
room temperature or
cooler (21°C/70°F or
less), transfer mixture
to a stove top pot to
heat. Always use a
thermometer to test the
internal temperature
of cooked ingredients;
they may feel cool to
the touch, yet still be hot
inside.
The nutribullet
Smart
®
Touch Blender™ Combo
is not intended for use
9
Publicidad
