Publicidad
Idiomas disponibles
Idiomas disponibles
EnGLIsh
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
•
This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge. Children
should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn unit off and keep away from the trigger
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Use only the supplied BLACK+DECKER charger.
Accessory Tools (Fig. C)
Your hand vac may be supplied with the following accessories:
-
Flip-up brush
9
-
Crevice tool
10
-
Pet brush
11
•
The crevice tool and pet brush can be fitted directly to the
nozzle
4
as shown in Fig. C.
Using the Flip-up Brush (Fig. D)
•
Flip the brush
9
into position for use as shown in Fig. D.
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and keep away from the trigger
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Use only the supplied BLACK+DECKER charger.
Switching On (Fig. E)
1. To switch the appliance ON, press and hold the On/Off
trigger
1
on the underside of the handle
2. To turn the appliance OFF, release the trigger.
Dry Pick Up
For everyday spills of dry material.
•
Do not fill the dust bowl
intake chute.
Optimizing the Suction Force
In order to keep the suction force optimized, the filters must be
cleared regularly during use.
14
2
.
3
beyond the end of the
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and keep away from the trigger
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Use only the supplied BLACK+DECKER charger.
Dust Bowl (Fig. F)
WARNING: Never use this cordless hand vacuum without
its filters.
IMPORTanT: Maximum dust collection will only be obtained
with clean filters and an empty dust bowl. If dust begins to fall
back out of the product after it is switched off, this indicates that
the dust bowl is full and requires emptying
To Empty the Dust Bowl (Fig. F)
1. Place the dust bowl over a trash bin and remove the dust
bowl
3
from the main housing
bowl counterclockwise and pulling the dust bowl away from
the main housing.
2. Remove the filter assembly by pulling it out of the
dust bowl.
3. Shake or lightly brush any dust from the filter assembly.
4. Empty the dust from the dust bowl into a trash bin and
wash if necessary. Ensure that the dust bowl is completely
dry before using.
5. Place filter assembly into position in the dust bowl.
6. Install the dust bowl onto the main housing, ensuring the
dust bowl slots
13
align with the main housing tabs
shown in Fig. F and rotate the dust bowl clockwise to lock it
firmly into position.
Cleaning the Filters (Fig. G)
1. Place the dust bowl over a trash bin and remove the dust
bowl
3
from the main housing
bowl counterclockwise and pulling the dust bowl away from
the main housing.
2. Remove the filter assembly by pulling it out of the
dust bowl.
3. Empty any dust from the dust bowl into a trash bin and
wash if necessary. Ensure the dust bowl is completely dry
before using.
4. Twist the pre-filter
15
pre-filter off of the filter
dust from the filter and pre-filter.
5. Wash the pre-filter and filter regularly using warm, soapy water.
The cleaner the filter is, the better the product will perform.
6. Ensure both filters are completely dry for 12 hours
before refitting. It is very important that the filters are
completely dry and correctly in position before use.
7. Install the pre-filter onto the filter, ensuring the filter
slots
17
align with the pre-filter tabs
pre-filter clockwise to lock it firmly into position.
8. Install the filter assembly into the dust bowl.
12
by twisting the dust
12
by twisting the dust
counterclockwise and pull the
16
. Shake or lightly brush any
18
and rotate the
14
as
Publicidad
