Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 Specifications
LCD display: 71 mm (2.8") TFT 262K true color
Display resolution 320 x 240 QVGA
Input voltage range: 8 - 32V
Operating temperature: 0°C - 50°C (32°F - 122°F)
Storage temperature: -20°C - 70°C (-4°F - 158°F)
Storage humidity: RH60%
Outline dimension: 20 x 8.5 x 2.8 cm
Weight: 500 g
3.3 Accessories Included
Instruction manual
Adaptor 6-PIN DLC
Adaptor 9-PIN DLC
Adaptor 30-PIN DLC
USB cable to connect to a computer for online upgrading.
3.4 Power supply
The power of the tool is provided via the vehicle's Data Link Connector (DLC). Follow the steps below
to power it up:
1. Find DLC on heavy-duty vehicle; a plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the 6-Pin or 9-Pin DLC diagnostic adaptor.
2. Plug one end of 6-Pin or 9-Pin DLC diagnostic adaptor into the included OBD II 16-Pin conector,
and connect the other end to the heavy-duty vehicle's DLC.
4. OPERATION
4.1 Connection
1. Turn the ignition off.
2. Locate the heavy-duty vehicle's Data Link Connector
(DLC)
3. Select the desired diagnostic adaptor according to your
vehicle's DLC. Plug one end of 6-Pin or 9-Pin DLC
diagnostic adaptor into the included OBD II 16-Pin
connector, and connect the other end to the heavy-duty
vehicle's DLC.
4. Turn the ignition on. Engine can be off or running.
5. After finishing, the system will enter the main menu
interface.
CAUTION: Don't connect or disconnect any test equipment with ignition on or engine running.
4.2 Diagnose
Use [UP] or [DOWN] button to select [diagnose] and press
[ENTER], the system will switch to the following protocol
selection interface.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
4
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
