BYK byko-spectra standard Instrucciones De Uso página 10

byko-spectra standard
5 Operation
Connecting to a Power Supply
Before connecting the line cord to a power supply outlet, check the electrical rating on the
byko-spectra product identification plate, to ascertain that your byko-spectra has the same
electrical power rating as the source of the supply.
Switch Board Controls
A - Sequence Button (Yellow)
B - Ultraviolet Source (UV) On-Off Button
C - Store Light (TL84) Source Button
D - Daylight (D65) Source Button
E - Home Light (Incandescent Illuminant A) Source Button
F - Store Light (Cool White Fluorescent) Source Button
G - Power Off Button (illuminated when unit is plugged in) (Red)
H - ColorGuard II® Lamp Timing Center
Operating the Switch Board
When the unit is plugged into a power source, the red OFF button (G) is illuminated. To
select a light source simply press the desired button. When a source is selected, the appro-
priate green button will illuminate to verify your selection. Pressing a different source but-
ton will turn on the selected source and turn off the original source. Turn off all sources
using the OFF (G) button. UV (B) is independently controlled and can be used with an-
other source or by itself. If the Home Light (E) is selected and not switched for 15-20
minutes, the unit will turn all lamps off (this is a lamp and energy saving feature).
10
BYK-Gardner GmbH
184 020 846 EDFS 2402