Publicidad
Display mode
Mode d'affichage
Modo de
indicacion
LGD Monitor
gay
Ecran ACL
Monitor LCD
QOSHQ|
DISPLAYING PICTURES ON
GITHE LCD MONITOR
SELECTING THE DISPLAY MODE
Il Set the Mode dial to "()" then turn on the power to
select the Display mode.
© The LGD monitor turns on automatically.
© When the monitor is turned on, the camera automatically
checks the card.
If there is no card in the camera, the Card
error indicator blinks on the control panel. If the card is in
another format and is unreadable, the camera
enters the
Card format mode. (p. 178)
When there are no pictures stored in the card, NO
PICTURE appears on the LCD monitor.
The last picture taken is displayed on the LCD monitor. The
frame number and the battery check indicator are also
displayed, as well as the Date, Recording mode, and
Protect indicators if they are set.
Recording mode, Battery Remaining, Date and Frame
number indicators will disappear after about three seconds.
If the batteries are low, the low-battery indicator appears
and blinks.
Note:
When turned on, the LCD monitor flashes, and
pictures appear in about 0.5 ~ 2 seconds. This is
not a malfunction.
Publicidad
