Publicidad
Idiomas disponibles
Idiomas disponibles
The wearer should ensure that:
• The hearing protector is fitted, adjusted,
and maintained in accordance with the
manufacturer's instructions.
• The hearing protector is worn at all times in
noisy surroundings.
• The hearing protector is regularly inspected
for serviceability.
If these recommendations are not adhered to, the
protection afforded by the hearing protector will
be severely impaired.
The size range for the earmuff is S M L.
The mean mass of the product is 448g.
Date of Obsolescence: 3 years from purchase date.
Not to be used in Explosive Atmospheres.
Additional Notes
ISOtunes® LINK 2.0 is compliant with Bluetooth®
V5.0. We do not guarantee compatibility of all
functions on every Bluetooth®-enabled device.
Please check your device's user manual for
compatibility and functionality.
Please note, the hearing protector provides an
electrical audio facility for entertainment. The
ear-muff provides audio signal sound pressure
level limitation which limits the entertainment
audio signal to 82 dB(A) effective to the ear. This
limit is maintained for Bluetooth signal inputs
which are standard to the Bluetooth A2DP, HFP,
and HSP specifications. There is no analog line
input on this product.
This earmuff is provided with electrical audio
input. The wearer should check correct operation
before use. If distortion or failure is detected, the
wearer should refer to the manufacturer's advice.
For additional information about ISOtunes
LINK 2.0, please visit ISOtunes.com/manuals.
For additional information or questions about
ISOtunes® products or spares and accessories,
please contact our support team.
Replacement Parts: Hygiene Kit (ear-cushions and
foam inserts) Model Number: IT-83
Replace ear cushions.
1. Put your finger between the ear
cushions and foam.
2. Pull the Foam Ear cushion away from
the earcup.
3. Remove the foam inserts in the earcup.
4. Install the new foam inserts
5. Snap the new ear-cushion in place on
the earcup
The following information shall be available from
the manufacturer on request:
a) results of tests performed in accordance with
this standard;
b) the name and country of the test laboratory
which performed the tests specified and the date
of the tests.
FCC
Caution: The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the users'
authority to operate the equipment.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
ISED Certification
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation is
EN
7
Publicidad
