Descargar Imprimir esta página

Fiamma COMPASS MULTIBOILER Manual De Instrucciones página 46

Máquinas de café espresso

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4.3.
Water Connection
1. Place the machine in a stable position on the
counter, ideally already in the final working
place and position.
2. Place the external motor/pump in an
adequate place close to the machine. Connect
the motor/pump with the machine, using the
water entry hose already installed on the
machine (see FIG.2).
3. Place a water filter system in an adequate
place close to the machine. Use the
connection hoses supplied with the machine
in order to connect the water filter system
with the pump.
4. Connect the power cable of the motor/pump
to the machine, following the instruction
provided with the pump. Only then connect
the machine's power cable to the socket.
4.4.
Electric Instalallation
 IMPORTANT: It is compulsatory that the electricity supply must be earthed. Only connect the
machine to an earthed mains supply.
 Make sure that power and frequency of the electricity supply correspond with the requirements of
the machine, indicated on the machine's type plate.
 The electricity supply must have a 30 mA protection with a disjunctor with 3 mm space between
the contacts.
 Connect the machine to a mains supply. Never use sockets, multiple sockets or extensions with the
machine.
 The electric installation must comply with current safety legislation in the country and location of
installation.
 On the bottom of the machine, the symbol
between different equipments.
5. Operating Instructions
5.1.
First Use: How to Start
SWITCHING ON/ OFF
 Turn on the water supply before switching on the machine!
 During the first use of the machine, the water heating only starts after the water level in the boilers
has reached the pre-set level (the green signal light turns off)
 In all other cases, the automatic heating is permanently working (except in case when the water
level detects no water)
1. Turn on the water supply on the water tap.
2. Press the ON/OFF button on the front of the machine in order to turn the Compass MB on.
3. The display lights up and shows the software version installed on the machine (first for the main
board, second for the touch screen display).
46
Espresso Coffee MachineCompass MB by fiamma
(Translated from original language) ENGLISH
ELECTRIC CONNECTION
MOTOR/PUMP
WATER FILTER SYSTEM
identifies the terminal for equipotential connection

Publicidad

loading

Este manual también es adecuado para:

Compass 2 mbCompass 3 mb