Lighted SERPIS Manual De Instrucciones página 12

THANK YOU FOR PURCHASING A LIGHTED SERPIS FAN.
TO ENSURE CORRECT OPERATION AND INSTALLATION, PLEASE READ AND FOLLOW THE
INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
1. To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin installing or servicing the fan.
2. Read and follow all instructions and safety guidelines carefully before installing.
3. Make sure all electrical connections comply with the local codes or ordinances and the National Electrical Code. If you are unfamiliar with
electric wiring, please consult a qualified and licensed electrician.
4. Make sure there is sufficient space to rotate the blades of the fan, which is at least 2m of clearance between the floor and the fan blade
tips. The fan should be mounted at least 1m from walls and/or other upright structures.
5. WARNING:The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 45Kg. To reduce the
risk offire, electric shock or personal injury, mount to the outlet box marked "acceptable for fan support" and use mounting screws provided
with the outlet box. The box must be supported directly by the building structure.
6. Electrical diagrams are for reference only. Switches must be CE, general-use switches. Refer to the instructions packaged with the light
kits and switches for proper assembly.
7. After assembling, check that all connections are firmly secured.
8. After making electrical connections, spliced conductors should be turned upward and pushed up carefully into outlet box. The wires should
be placed separately from the grounded conductor and the equipment-grounding conductor on opposite side of the outlet box.
9. WARNING:To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat.
10. Do not operate the reverse switch until the fan has come to a complete stop.
11.Do not insert anything into the fan blades while they are rotating.
12. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
13. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for cleaning.
NOTE: The important safety precautions and instructions on the manual are not meant to cover all possible conditions and situations that
may occur. It should be understood that common sense and caution are necessary factors during the installation and operation of the fan.
NOTE: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities that are
different or impaired, or lack of experience and/or knowledge, unless such persons are supervised and/or trained to operate the appliance
by a person responsible for their safety.
NOTE: Children should be supervised to ensure that they do not use appliances as a toy.
NOTE: You must install a switch or circuit breaker that disconnects all power poles of at least 3 mm between each pole.
Dpto. Comercial / Marketing
pedidos@algsa.es
SAFETY GUIDELINES
12
MANUAL DE INSTRUCCIONES
INSTRUCTIONS MANUAL