Lighted SERPIS Manual De Instrucciones página 16

3.INSTALL THE LED LIGHT KIT
Place the magnetic LED light kit on the fan body. Connect the cables to the fan (Fig.7)
4. CONNECT ALL WIRES
Insert the A connector(red/white/pink wires) of fan motor into the DC POWER INPUT socket of the receiver
Insert the B light connector(white/blue wires) of fan motor assembly into the 2P LIGHT socket of the receiver
Insert the C motor connector(white/black wires) of the receiver assembly into the main power (Fig. 8)
Place the receiver in the hanging bracket with its flat side facing up.
Dpto. Comercial / Marketing
pedidos@algsa.es
C
A
B
16
MANUAL DE INSTRUCCIONES
INSTRUCTIONS MANUAL