Lighted SERPIS Manual De Instrucciones página 17

5. INSTALL THE UPPER CANOPY:
Loosen screws at the bottom of mounting bracket but do not remove them. Raise the upperN canopy and align
the keyholes at the bottom of the canopy with the screws at the bottom of mounting bracket. Rotate the canopy
until the screws of the mounting bracket drop into the slot recesses. Tighten screws (Fig. 9)
6. INSTALL THE LAMPSHADE
Make the lampshade slot align with the slot, then slightly rotate the lampshade clockwise until the lampshade
is secured.(Fig. 10-11)
Dpto. Comercial / Marketing
pedidos@algsa.es
17
MANUAL DE INSTRUCCIONES
INSTRUCTIONS MANUAL